Terrace H&A specializes in service support for all brands of heating & air equipment including heat pumps, gas packs, and electric furnaces. In addition, we strongly recommend and offer annual maintenance agreements to keep your mechanical system operating to design parameters, minimize untimely failure, and reduce the operating cost of your heating & air equipment. Other services provided by Terrace H&A include duct design, duct system replacement, custom sheet metal fabrication, equipment change out, gas piping, and installation of mechanical systems for new construction.
A Maintenance Agreement is the best way for a home owner to ensure their HVAC system(s) are running as efficiently and trouble-free as possible from season to season. A Maintenance Agreement is like a regular visit with your doctor. It's good to keep up with on a regular basis, to avoid any major problems that may be prevented if detected early on.
Spring Check-Up
| ● | Check for proper refrigerator pressure |
| ● | Check all electrical connections and components in the condensing section of the system |
| ● | Clean the condenser coil and remove debris as necessary |
| ● | Clean and treat drain lines for proper drainage. |
| ● | Check secondary pan for rust and possible leaks and float safety switches for proper operation (splits only) |
| ● | Check draft motor and flue vent for proper air flow. |
| ● | Inspect the ignition controls and clean as necessary |
| ● | Test all safeties, sensors and switches. |
| ● | Inspect heat exchanger for potential leaks |
| ● | Check all electrical connections and components in the furnace or blower section |
| ● |
Fall Check-Up
| ● | Check defrost circuit for proper operation |
| ● | Check emergency heat for proper operation |
| ● | Verify correct refrigerant charge |
|
|
|
| ● | Check all electrical connections and components in Air handler |
Heat Pumps
